- Article n°: 63154
- Fabricant no.: F-G14-12-E-UR
- EAN: 4049469046606
- Poids: 0,006 kg
Date de livraison inconnue
incl. TVA plus frais d'envoi
|1ère page:||Raccords cannelés 10mm (3/8")|
|2ème page:||1/4 NPSM|
|Compatibilité:||Tubes rigides (PUR), Soft tubing (PVC, Silikon, Neoprene)|
|Longueur de filetage:||10mm|
|Spécification:||Forme: 90° incliné|
10mm Angled connector piece made from plastics for PVC, PU, PA silicone or PE with an inner diameter of 10mm, equipped with a G1/4" outer thread. UV reactive.
Note for watercooling beginners:
The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
Note: Due to the longer outer thread of the colored hose fittings some connector may require spacer rings to be compatible. (Product No.: 14087 or 14151). the thread can also be shortened at aour own responsibility with a fine saw.
Important: the fitting is not equipped with an O-ring seal, to ensure tight seal we recommend Phobya Thread sealing tape (Product. No.: 32002)