- Article n°: 63062
- Fabricant no.:
- EAN: 4049469045029
- Poids: 0,009 kg
> 250 départ entrepôt disponible
incl. TVA plus frais d'envoi
|1ère page:||Raccord cannelé 12 & 13mm (1/2")|
|2ème page:||G1/4" filetage extérieur|
|Compatibilité:||Tubes rigides (PUR), tuyaux souples (PVC, Silicone, Neoprene)|
|Longueur de filetage:||5mm|
Our trusted fittings are available in a whole new design!
Robust high-quality barbed fitting with cylindrical thread (G1/4"). The fitting is suitable for PVC, OU, PA, silicone and PE hoses with an inner diameter of 13mm. With integrated 1/4" Perbunan(r) O-Ring seal.
Material: Brass, black nickel coated
Hose size: 13mm inner diameter
Thread size: G1/4"
Extent of delivery:
Black nickel barbed fitting with O-ring seal
Note for watercooling beginners:
The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required