- Article n°: 63244
- Fabricant no.:
- EAN: 4049469066154
- Poids: 0,032 kg
> 50 départ entrepôt disponible
incl. TVA plus frais d'envoi
|1ère page:||Raccord cannelé 12 & 13mm (1/2")|
|2ème page:||G1/4" filetage extérieur|
|Compatibilité:||Tubes rigides (PUR), tuyaux souples (PVC, Silicone, Neoprene)|
|Longueur de filetage:||5mm|
|Pivotant:||Oui - 360°|
High-grade and robust 13mm barbed fitting made from nickel coated brass for PVC,PU,PA,silicone or PE hoses with an inner diameter of 10mm. G1/4" outer thread.
With integrated 1/4" Perbunan seal ring.
Thread size: G1/4"
Hose inner diameter: 10mm
Material: Nickel coated brass
Extent of delivery:
1x 13mm (1/2") barbed fitting G1/4" with O-ring (High-flow) - revolvable
Note for watercooling beginners:
The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required