10mm (3/8") Embout Métal Cannelé 1/4" avec Joint Torique

10mm (3/8") Embout Métal Cannelé 1/4" avec Joint Torique

Article n°: 63009
Fabricant no.:
EAN: 4049469008246
Poids: 0,019 kg

> 250 prêt à être expédié en 1-3 jours

2,62 € *

incl. TVA plus frais d'envoi

10mm barb fitting made from nickel-coated brass with O-ring for PVC, PU ,PA, silicone or PE...plus

Fermer menu

Informations sur le produit

10mm barb fitting made from nickel-coated brass with O-ring for PVC, PU ,PA, silicone or PE hoses with an inner diameter of 10mm. G1/4" outer threads. threads straight, SW 14.

Note for watercooling beginners:
The connectors for imperial hoses(7/16“, 3/8“, ½“) are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.

Overview:
10mm (3/8“) hose clamp: up to 8mm none, from 10mm up required
10mm (7/16“) hose clamp: up to 8mm none, from 10mm up required
12mm (1/2“) hose clamp: up to 11mm none, from 12mm up required
13mm (1/2“) hose clamp: up to 11mm none, from 13mm up required

Détails techniques et vidéos… plus

Détails techniques

Pivotant:	Non
Matériau:	Laiton
Longueur de filetage:	5mm
Compatibilité:	tuyaux souples (PVC, Silicone, Neoprene), Tubes rigides (PUR)
2ème page:	G1/4" filetage extérieur
Spécification:	Forme: droit
Fabricant:	Aquatuning
1ère page:	Raccord cannelé10mm (3/8")
Couleur:	nickel