13mm (1/2") Embout Cannelé 1/8" avec Joint Torique (High-Flow)

Article n°: 63052
Fabricant no.:
EAN: 4049469039608
Poids: 0,013 kg

> 250 prêt pour l'expédition, délai de livraison 1-3 jours

1,80 € *

13mm barbed fitting made from nickel coated brass with O-ring seal for hoses with an inner...plus

Informations sur le produit

13mm barbed fitting made from nickel coated brass with O-ring seal for hoses with an inner diameter of 11-13mm .
Inner diameter of connector: 13mm
This hose connector was specially designed for Highflow systems.

Note: For safety reasons we recommend the use of zip ties or hose clamps for additional hose fixation.

Note for watercooling beginners:
The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.

Overview:
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required

Détails techniques et vidéos… plus

Détails techniques

Pivotant:	Non
Matériau:	Laiton
Compatibilité:	tuyaux souples (PVC, Silicone, Neoprene), Tubes rigides (PUR)
Spécification:	Forme: droit
Fabricant:	Aquatuning
2ème page:	G1/8" filetage extérieur
Longueur de filetage:	7-8mm
1ère page:	Raccord cannelé 12 & 13mm (1/2")
Couleur:	nickel