- Article n°: 63066
- Fabricant no.:
- EAN: 4049469045067
- Poids: 0,018 kg
> 50 prêt à être expédié en 1-3 jours
incl. TVA plus frais d'envoi
Our trusted fittings are available in a whole new design!
Robust high-quality barbed fitting with cylindrical thread (G1/8"). The fitting is suitable for PVC, OU, PA, silicone and PE hoses with an inner diameter of 12mm. With integrated 1/8" Perbunan(r) O-Ring seal.
Material: Brass, black nickel coated
Hose size: 12mm inner diameter
Thread size: G1/8"
Extent of delivery:
Black nickel barbed fitting with O-ring seal
Note for watercooling beginners:
The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
|Compatibilité:||tuyaux souples (PVC, Silicone, Neoprene), Tubes rigides (PUR)|
|2ème page:||G1/8" filetage extérieur|
|Longueur de filetage:||7-8mm|
|1ère page:||Raccord cannelé 12 & 13mm (1/2")|