The second version of the Alphacool Repack Dual Bayres 5,25" is now available!
Based on the development of the Alphacool Repack Dual 5.25 Bay Station, this Bay reservoir also brings its advantages to the table: Easy mounting, compact dimensions and appealing design! All of these features and many more are implemented in the Alphacool Repack Single Bayres. But Alphacool would not be Alphacool, if this new product would not also have some extremely interesting new features, which were not available until now!
The Alphacool Repack Dual Bayres 5,25" - Rev.2 is designed for installation in the front of an enclosure. Two vacant 5.25” drive bays are needed. By default, the connection of in- and Outlet can be achieved via ¼” threaded openings. Additionally Alphacool offers the possibility to use 3/8” threads for reduced flow resistance. Of course all four openings can also be used parallel, e.g. to allow installation of a second cooling loop.
New technologies implemented in the Alphacool Repack Dual Bayres:
So far everything sounds like a standard reservoir, but the developers have integrated some great features to improve the reservoir and its functionality:
Unlike most reservoirs, where the coolant is sent around multiple corners, still leaving micro-bubbles in the coolant, this reservoir utilizes a new technology: Both In- and Outlet openings are equipped with a special filter which eliminates even the smallest bubbles in the coolant!
Filling has always been a hassle with standard slot-in reservoirs: Unscrew, pull out, fill, push in and tighten screws again. Enough of this! The front of this reservoir has a filling straw which can be taken out by unscrewing it. As it is hollow, it can now be used for filling of the reservoir. We recommend using a filling bottle or funnel from our portfolio.
The front of the reservoir, the component which mainly remains visible after installation, is just beautiful to look at: Plexi, Acetal and a fill level indicator in combination with the typical Alphacool copper create a truly elegant design. Lighting is the next step towards a perfect system: At the rear of the reservoir, up to six 5mm LEDs can be inserted.
Highlight: From the top a 10cm long cold light cathode can be inserted! This is the ultimate lighting source four your reservoir. In combination with the LEDs it is even possible to have different colors inside of the reservoir. Especially with a Heatmaster as a controller, the possibilities are endless!
All Alphacool Repack Bayres of the second revision feature a modular design. This means that a standard of this reservoir can be rebuilt to e.g. a pump reservoir. Different pump reservoirs can also be made compatible with other pump types, or be transformed into a standard reservoir. This is possible, as the reservoir is not glued together at the back, but rather screwed together and sealed by a gasket.
More power, better looks, easy handling and high quality: This is truly a First-class reservoir for your system!
Material: Plexiglas/Acetal, brass
Connection threads: 2x ¼“ and 2x 3/8”
Dimensions (L x W x H): 91 x 148 x 84mm
Pre-drilled holes for 6x 5mm LEDs
Mount for 10cm CCFL
Conforms with ROHS
Extent of delivery:
1x Alphacool Repack Dual Bayres 5,25" - Rev.2
6x Mounting screws
2x 3/8” screw plugs
Due to the large number of different enclosures, complications may arise when inserting the Dual reservoir. The dimensions of the reservoir were made to fit flush in the front of the enclosure, meaning that internal modifications to the enclosure may be needed for installation.
Note: The copper-colored logo is covered by a protective foil. To have the logo shining and clean, simply remove this foil.
Note regarding cathodes:
We have measured that the cathodes have manufacturing tolerances of up to 0.3mm, even amongst the cathodes in the same package. As the fit of the cathodes is meant to hold them in place, it might be that due to the tolerances the cathodes will not fit at first. The small amount of excess material can easily be removed with a few brushes of sandpaper.
Important Note: Please note that the firm Alphacool International GmbH accepts no liability for damages of this product by using other coolants. We would like to point out that other coolants as inhibitors often contain or other corrosive substances attack the acteal, plase only usw our Cape Kelvin Catcher.
This product has been tested for you
Dieses Produkt wurde für Sie getestet
Attention: Le fabricant Mayhems informe que des liquides de Mayhems, en particulier la série de produit Aurora, seulement doivent être utilisés pour les effets de show et modding. Ces liquides ne devraient pas rester plus de 14 jours dans le système.
Nous soulignons également que des liquides de Mayhems peuvent endommager les produits de refroidissement par eau et donc la garantie expire suivant les fabricants lors de l'utilisation des liquides Mayhems: Koolance, Phobya, Alphacool, Aqua Computer, Watercool
Les dommages comme: des blocages, la dissolution des radiateurs en aluminium, la destruction des récipients collés, etc. sont le résultat de l'utilisation de Mayhems, mais ne sont pas remboursés par Mayhems. Utilisez à vos propres risques.
|Compatibilité de la pompe:||pour pompes à circulation|
|Connecteur:||G1/4" filetage intérieur|
|ouverture de remplissage:||G1/4" filetage intérieur|
|Nombre de connexions:||2|
|trou pour LED:||disponible (pour LED 5mm)|
|Matériau:||Plexi, POM, laiton|
|Type de réservoir:||1x 5 1/4" Baie|
|Dimensions:||91 x 148 x 84mm|
Cliquez ici pour afficher cette question.
Appuyez ici pour afficher ces avis.
Optisch sehr ansprechend wenn man LED´s einbaut, passt pefekt in den 5,25" Doppelschacht und verrichtet treu und vorallem dicht seinen Dienst! ;) Durch den Einfüllstutzen war die Befüllung sehr einfach.